• Highlights
  • Specifications
  • Accessories
  1. SAS to SAS RAID subsystem
  2. Redundant RAID controller
  3. EonPath multi-pathing, load-balancing software
  4. 4 SAS 4x wide host ports
  5. Hardware RAID6 engine by dedicated ASIC400 chipsets
  6. Superior performance w/ uncomplicated connectivity
  7. 12 SAS disk drives
  8. Expansion to 48TB via 4x wide expansion port
  9. Corresponding JBODs: S12S-J1002-R (dual-controller)
See details about expansion enclosures:S12S-J1002-R (dual-controller)
Model Host Interface Drive Interface SAS Exp. Controller Form Factor
S12S-R1032 4 multi-lane wide ports
(SFF-8088)		 SAS 2 wide ports (SFF-8088) Dual redundant 2U rack-mount
Corresponding JBODs
RAID JBOD Max. number
S12S-R1032 S12S-J1002-R 3

Information about supported disk drives, network components, and software compatibility, please refer to our VIPRoom website (for authorized dealers).

RAID
  1. Hardware RAID5 & RAID6
  2. Supports RAID 0, 1 (0+1), 3, 5, 6, 10, 30, 50, 60, NRAID
  3. RAID Migration
  4. Configurable stripe size and write policy per array
  5. Multiple Global, Dedicated, & Enclosure-specific hot-spares
  6. Intelligent Drive Handling:
    1. In degraded mode: skips irreparable blocks to continue rebuild
    2. In normal operation: data-block verification and repair
Host Interface
  1. 4 SAS wide ports
  2. 12Gbps bandwidth (half duplex) per port
  3. Concurrent I/O commands
  4. Tagged command queuing up to 1024
  5. Max. command queue up to 1024
  6. Fault-tolerant host links with the EonPath multi-pathing software
  7. Included cables:
    1. S12S-R1032 – 2x Mini-SAS-to-Mini-SAS SFF-8088 120cm cables
Drive Interface
  1. 12 3.0Gbps SAS, hot-swappable drive trays
  2. Accommodates 1-inch pitch, 3.5-inch SAS disk drives
  3. S.M.A.R.T. and NCQ support
  4. Automatic bad-sector reassignment
  5. Dedicated bandwidth to each connected drive
  6. In-band enclosure service through the expansion links from expansion enclosures
  7. Path redundancy to disk drives via edge expanders and expanders on JBOD controllers through separate SAS domains
  8. MUX kits with port selectors for dual-controller access to SATA drives
System Components
  1. High density, smartly managed 2U enclosure
  2. Dual redundant RAID controller
  3. One DIMM module with capacities from 512MB to 2GB
  4. Redundant, hot-swappable 530W power supply units
  5. Redundant, dual-speed cooling modules 
  6. Twelve (12), hot-swappable drive trays
  7. Two (2) forearm handles
  8. Li-Ion battery backup unit (BBU), life expectancy and charge level aware
Management
  1. COM1 serial port for local access to firmware-embedded utility
  2. COM2 for UPS connection
  3. Automated cache flush and caching mode operation per enclosure status
  4. GUI, Telnet, and SSH system monitoring via Ethernet
  5. Java-based SANWatch software
  6. Firmware-embedded manager via RS-232C (audio jack) that is platform independent
  7. Widest range of event notification methods including email, LAN broadcast, fax, SNMP traps, SMS, and MSN
  8. LCD keypad panel for monitoring and access to all configuration options
  9. Variable logical drive options per DIMM size
  10. Module status LED indicators:
    1. Two (2) per drive tray
    2. Seven (7) per controller module
    3. One (1) per power supply unit
    4. One (1) per BBU module
    5. Two (2) per cooling module
  11. Presence detection & thermal sensors via I2C bus
Power Supply Module

Redundant hot-swappable power supplies with PFC

Input 100VAC at 10A, 240VAC at 5A with PFC (auto-switching)
47 to 63Hz
Output (Maximum output: 530 Watts)
+12.0V 43A max.
+ 5.0V 25A max.
Cooling Module

Redundant dual-thermal-fan cooling modules

Maximum Air Flow 90CFM (high speed); 70.7CFM (low speed)
Environmental Specifications
Operating temperature 5º to 40ºC  (35°C if battery is applied)
Non-operating temperature - 40º to 60ºC
Relative humidity 5 to 95%, non-condensing
Operating altitude Operating: 0 to 12,000 ft
Dimensions
  1. Chassis without handles: 446(W) x 88(H) x 498(D) mm (17.56W x 3.46H x 19.6D inches)
  2. Chassis with handles: 482 (W) x 88(H) x 516(D) mm (18.97W x 3.46H x 20.31D inches)
  3. Package: 575W x 390H x 780D mm (22.63W x 15.35H x 30.7D inches)
Weight
  1. S12S-R1032: Net weight - 18.71kg (41.16 pounds)
  2. Gross weight – 25.9kg (56.98 pounds)

Spare Parts

IFT-9373S1DT2S1S 3.5" Hard disk drive tray w/MUX board, exclusively for dual-controller subsystems v1.2
IFT-9279CPSU Power supply module for EonStor 2U series, ASIC400 S12S-X1032 series subsystems, 530W capacity
IFT-9279CFanMod Cooling fan module for EonStor, ASIC400, and 2U-profile S12S-X1032 series subsystems
IFT-9275CBT Li-Ion battery module
IFT-89S10RE12 SAS to SAS RAID controller module, 2 x SAS host ports + 1 SAS expansion port, RAID 6, for dual-controller S12S-R1032
IFT-89S10RE12M5 SAS to SAS RAID controller module, 2 x SAS host ports + 1 SAS expansion port, RAID 6, for dual-controller S12S-R1032, w/ 512MB memory
IFT-9011 Null Modem, DB9 female to DB9 male, wires swapped
IFT-9270ASCab RS-232C serial cable, audio-jack to DB9
IFT-9270CmSASCab2 SAS external, Mini SAS 4x to Mini SAS 4x (SFF-8088) cable, 120cm
IFT-DDRESCEM5 512MB DDR RAM DIMM module

Accessories

IFT-9373CDTray 3.5" Hard disk drive tray
IFT-9270AYCab Serial port Y-cable for dual-controller subsystems, 2 audio jacks -to- 1 DB-9
IFT-9270CmSASCab4 SAS external cable, Mini-SAS 4x (SFF-8088) to Infiniband (SFF-8470 thumbscrew type4) x, 120cm.
IFT-9275CBTE Battery cell pack, Li-Ion, high capacity for EonStor ASIC400, 2U-profile series
IFT-9270CUPSCab UPS cable, audio-jack to DB9
IFT-9270CUPSYCab Serial port Y-cable to UPS device for dual-controller subsystems, 2 audio jacks -to- 1 DB-9
IFT-9279CSlider36 Enhanced rackmount bracket assembly for EonStor S12S-X1032 2U series subsystem, 23 to 36 inches rack depth
9273S1N2S1S IFT-9273S1N2S1S MUX board, 3.5" HDD, exclusive for SAS 3G drive side dual-controller subsystems, 5V only, Rev. 1.2
IFT-DDRESCEMA 1GB DDR RAM DIMM module